Specifications
Specifications
Microphone Inputs: | (2) Female XLR Pin 2 Hot |
Input Impedance: | 600 Ohms balanced |
Phantom Power: | +48 Volt |
GAIN: | +50 dB |
EIN: | −120 dB |
Maximum Input Level: | +18 dBu |
Frequency Response: | +0, −0.2 dB 20 Hz - 20 kHz, ref. 1 kHz |
THD+N: | <.005%, 20 Hz - 20 kHz |
Insert Inputs: | (2) 1/4" TRS |
Send Level (tip): | +19 dBu maximum |
Maximum Return Level (ring): | +19 dBu maximum |
Line Inputs: | (2) 1/4" TRS balanced or unbalanced |
Input Impedance: | 20 kOhm balanced, 10 kOhm unbalanced |
Maximum Input Level: | +22 dBu |
Frequency Response: | +0, −0.2 dB 20 Hz - 20 kHz, ref. 1kHz |
THD+N: | <.009% A/D, 20 Hz - 20 kHz |
Instrument Input: | (1) 1/4" mono jack |
Input Impedance: | 1 MOhm unbalanced |
Maximum Input Level: | +19 dBu |
Frequency Response: | +0, −0.25 dB 20 Hz - 20 kHz, ref. 1 kHz |
THD+N: | <.0125% A/D |
Crosstalk: | <−74dB any input or output to any recording channel, 20 |
| <−95dB at 1 kHz typical |
Line Outputs: | (2) 1/4" TRS balanced or unbalanced |
Level: | +19 dBu maximum (+4 dBu nominal input = −15 dbFS) |
Impedance: | 110 Ohms |
Headphone Output: | (1) 1/8" stereo jack 100 mW per channel at 50 Ohms |
MIDI Interface: | 5 pin DIN connectors for MIDI in and MIDI out |
Sample Rate: | 44.1 kHz or 48 kHz (determined by computer application) |
Dynamic Range: | A/D (24 Bit) 104 dB typical, |
| D/A (24 Bit) 109 dB typical, |
A/D/A (24 Bit) | 103 dB typical, |
Analog Path: | 118 dB typical, |
USB Type B Socket: | Version 1.1, Version 1.1 hubs are not supported |
Power Requirements: | USB powered |
Dimensions: | XXX x XXX x XXX |
Weight: | XXX lbs. |
Lexicon engineers are constantly working to improve the quality of our products.Specifications are therefore subject to change without notice.
34
