Recording Using the Microphone/Line Input
4.Press Rewind and press the Play button to listen to the track you have just recorded.
5.Turn the Lambda Studio™ Output Level knob to adjust the listening volume, and make sure the Monitor Mix knob is somewhere in the middle between Direct and Playback.
To overdub a second track:
1.Click anywhere in the gray area (not on the buttons) of the Track 2 window
(labeled as Audio 02).
2.In the Inspector, click the IN: box and select IN 1 for Track 2's input. (IN 1 relates to Mic 1 and Line 1, IN 2 relates to Mic 2 and Line 2).
3.In the Track 2 window, the Record Enable button 
should already be red. If it isn't, click it so that it turns red.
4.In the Track 2 window, click the Input Monitoring button 
so that it is not lit.
To set monitor levels for a comfortable listening level:
1. On the front of the Lambda Studio hardware, locate the Monitor Mix knob.
2.While playing back the recording, adjust the Monitor Mix knob to balance the levels between direct input signal and recording playback. To make the direct input louder than the recording playback in the headphones, turn the Monitor Mix knob towards the Direct side. To make the recorded track louder, turn the Monitor Mix knob towards the Playback side.
NOTE: Changing the Monitor Mix does not affect the recording level, only what you hear while recording. You can also adjust the playback level and pan position
25
