Lexicon PCM92 manual Rear Panel, Power Jack, Ethernet Input, AES/EBU In/Out, Analog In/Out

The Rear Panel

1 2 3 4 5

6 7

1. Power Jack

Standard 3-pin IEC power connector. 100-240V, 50-60Hz automatic switching to correct voltage range.

2. Ethernet Input

This RJ-45 connection is used to network PCM92 devices and control them via Ethernet.

3.MIDI IN

Receives MIDI information from other MIDI equipment such as master keyboard controllers, MIDI foot controllers, sequencers and synthesizers.

MIDI THRU

Passes any MIDI data received without change.

MIDI OUT

Transmits MIDI data to other equipment.

4.AES/EBU In/Out

AES/EBU format digital connectors conform to AES professional standards.

5. Analog In/Out

Output impedance is 30Ω, electronically balanced, and levels up to +20dBu maximum full scale.

6.FOOT CONTROLLER/FOOTSWITCH JACKS

Functionality to be implemented in a future release.

7.WORD CLOCK INPUT

This connection allows the PCM92 to lock to a master system clock. It is not terminated. For best results we recommend using “T” connectors when setting up a BNC Word Clock network and terminating the end of of this network with a 75 ohm BNC terminator.

5