Machine Config

The Machine Config menu lets you configure the PCM92 processor as one, two, three, or four virtual machines in a new preset. Note that once you’ve selected a configuration, you must then populate each virtual machine with a Machine Preset (see page 11 for more information).

Choices include:

Single Mono In Stereo Out

Single Stereo

Dual Mono

Cascade Stereo

Cascade Mono

Cascade Mono to Stereo

Combined Stereo Mono In

For more detailed descriptions of each configuration, see page 14.

MIDI Control

The MIDI Control sub-menu lets you adjust the following MIDI-related options:

MIDI

Turns MIDI processing on or off.

Device ID

Select the connected MIDI device’s ID here. Choose from 0-126.

Base Channel

Select the connected MIDI device’s base channel here. Choose from 0-15.

Machine 1-4

Select each virtual machine’s channel here. Choose from 0-15.

Bank Dump

Lets you copy an entire bank of presets from the PCM92 to another device via MIDI. (For a map of banks and presets, see page 24; to see the current preset’s bank number, press Knob C while viewing the Preset screen.) When Bank Dump is highlighted, turn the corresponding B or C Knob to select a bank. Press the corresponding B or C Knob to send the bank to the connected device.

Tempo Control

The Tempo Control sub-menu contains the following options:

Tempo Value

Set the current preset’s tempo here by turning Knob A, or by pressing the

Tap Tempo button at least two times.

 

Tempo Beat

 

Tempo is expressed in BPM. This control allows you to specify the value

 

of the beat. Eighth, quarter, and half note values are available. If, for exam-

 

ple, the rate is 120 BPM, and you select eighth-note here, the tempo will

 

be 120 eighth-notes per minute. If you select quarter-note here, the tempo

20

will be 120 quarter-notes per minute. (The factory default is quarter-note.)

Page 26
Image 26
Lexicon PCM92 manual Device ID, Base Channel, Machine, Bank Dump, Tempo Value, Tempo Beat