Audio Setup menu
Function | Description | |
Mute | See "Muting the sound" on page 35 for details. | |
|
| |
Volume | See "Adjusting the sound level" on page 35 for details. | |
|
| |
Power On/Off Ring | See "Turning off the Power On/Off Ring Tone" on page 35 for details. | |
Tone | ||
| ||
|
|
Display menu
Function | Description | |
Aspect Ratio | There are several options to set the picture’s aspect ratio depending on your | |
input source. See "Selecting the aspect ratio" on page 36 for details. | ||
| ||
Keystone | Corrects any keystoning of the picture. See "Correcting picture distortion" on | |
page 29 for details. | ||
| ||
| Displays the position adjustment page. To move the projected picture, use the | |
| directional arrow keys. The values shown on the lower position of the page | |
Position | change with every key press you made until they reach their maximum or | |
minimum. | ||
| ||
| This function is only available when the PC signal is selected. | |
|
| |
| Conceals the poor picture quality in the four edges. You can also manually press | |
Overscan Adjustment | / to decide how much to be concealed. Setting 0 means the picture is | |
100% displayed. The greater the value, the more portion of the picture is | ||
| concealed while the screen remains filled and geometrically accurate. | |
|
| |
| H.Size | |
| Adjusts the horizontal width of the picture. | |
| This function is only available when the Component or PC signal is | |
| selected. |
Phase
Adjusts the clock phase to reduce picture distortion.
PC & Component
YPbPr Tuning
This function is only available when the
Component or PC signal is selected.
| Auto |
| Adjusts the phase, and frequency automatically |
| This function is only available when the PC signal is selected. |
|
|
Digital Zoom | See "Magnifying and searching for details" on page 37 for details. |
|
|
Film Mode | See "Setting Film Mode" on page 35 for details. |
|
|
3D Comb Filter | See "Setting 3D Comb Filter" on page 35 for details. |
Using the projector | 43 |
