Reset All Settings | Returns all settings to the factory preset values. |
The following settings will still remain: Keystone, Language, Projector | |
| Position, High Altitude Mode, Password, Key Lock, and ISF. |
| The ISF calibration menu is password protected and only accessible by |
| authorized ISF calibrators. The ISF (Imaging Science Foundation) has developed |
| carefully crafted, |
ISF | and has implemented a training program for technicians and installers to use |
these standards to obtain optimal picture quality from BenQ video display | |
| devices. Accordingly, we recommend that setup and calibration be performed |
| by an ISF certified installation technician. |
| For more information, please go to www.imagingscience.com or |
| contact the place you purchased the projector. |
Information menu
This menu shows you the current operating status of the projector.
Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen.
Function | Description | |
Source | Shows the current signal source. | |
|
| |
Preset Mode | Shows the selected mode in the Picture > Preset Mode menu. | |
|
| |
Resolution | Shows the native resolution of the input source. | |
|
| |
Color System | Shows input system format: NTSC, PAL, SECAM, YUV, or RGB. | |
|
| |
Equivalent Lamp | Shows the total lamp time used. | |
Hour | ||
| ||
|
| |
3D Format | Shows the current 3D mode. | |
3D Format is only available when 3D Mode is enabled. | ||
| ||
|
| |
Firmware Version | Shows the firmware version of your projector. | |
|
|
46 Using the projector
