PIX SHAPE OPERATION

Pix Shape- There are three categories during it. And the showned troop of options during Pix Shape mode change by detecting HD, SD, or PC inputs.

The showned troop of options during HD,SD, or PC inputs are listed as below:

HD: Full / WaterGlass / Zoom1 / Zoom2

SD: Standard / WaterGlass / Zoom1 / Full / Zoom2

PC: Normal / Full / Dot by Dot

1Press the MENU key on the remote control to display the Main menu.

2Use CURSOR ◄ ► keys to highlight the ADVANCED mode. Press OK.

3Use CURSOR (UP) and (Down) keys to select the Pix Shape option. Press OK.

4Use CURSOR (UP) and (Down) keys to select Standard, WaterGlass, Zoom1, Full, or Zoom2 option. Press OK.

BACKLIGHT OPERATION

1Press the MENU key on the remote control to display the Main menu.

2Use CURSOR ◄ ► keys to highlight the ADVANCED mode. Press OK.

3Use CURSOR (UP) and (Down) keys to

select the Backlight option. Press OK.

4Use CURSOR (UP) and (Down) keys to select the desired value between 0 to 20.

LIGHT SENSOR OPERATION

1Press the MENU key on the remote control to display the Main menu.

2Use CURSOR ◄ ► keys to highlight the ADVANCED mode. Press OK.

3Use CURSOR (UP) and (Down) keys to select the Light Sensor option. Press OK.

4Use CURSOR (UP) and (Down) keys to

select the Off or On option. Press OK.

OSD DISPLAY TIME OPERATION

OSD Display Time- There are ten categories for your choice of 1 min, 2 min, 3 min, 4 min, 5 min, 6 min, 7 min, 8 min, 9 min and 10 min during OSD Display Time mode.

1Press the MENU key on the remote control to display the Main menu.

2Use CURSOR ◄ ► keys to highlight the ADVANCED mode. Press OK.

3Use CURSOR (UP) and (Down) keys to select the OSD Display Time option. Press OK.

4Use CURSOR ◄ ► keys to select the 1 min, 2 min, 3 min, 4 min, 5 min, 6 min, 7 min, 8 min, 9 min, or 10 min option. Press OK.

RESET ADVANCED OPERATION

Reset Advanced- It can make the previous adjusting settings during the ADVANCED mode recovered from the factory default value.

1Use CURSOR ◄ ► keys to highlight the ADVANCED mode. Press OK.

2Use CURSOR (UP) and (Down) keys to highlight the Reset Advanced option. Press OK.

3Use CURSOR (UP) and (Down) keys to select Reset or Cancel option. Press OK.

NOTE : Press the MENU key to return to the previous

ADVANCED menu.

20

Page 20
Image 20
Sanyo LCD-32E3, LCD-19E3 manual PIX Shape Operation, Backlight Operation, Light Sensor Operation, OSD Display Time Operation