BenQ W1080ST, W1070 user manual Function Description

Picture menu

Function	Description
Preset Mode	Pre-defined picture modes are provided so you can optimize your projector
	picture set-up to suit your program type. See "Selecting a preset mode" on
	page 30 for details.
User Mode	Selects a preset mode that most suits your need for the picture quality and
	further fine-tune the picture based on the selections listed below. See "Setting
Management
	the User 1/User 2/User 3 mode" on page 30 for details.
Brightness	Adjusts the brightness of the picture. See "Adjusting Brightness" on page 31 for
	details.
Contrast	Adjusts the degree of difference between dark and light in the picture. See
	"Adjusting Contrast" on page 31 for details.
Color	Adjusts the color saturation level -- the amount of each color in a video
	picture. See "Adjusting Color" on page 31 for details.
Tint	Adjusts the red and green color tones of the picture. See "Adjusting Tint" on
	page 32 for details.
Sharpness	Adjusts the picture to make it look sharper or softer. See "Adjusting Sharpness"
	on page 32 for details.
Color Temperature	There are several color temperature settings available. See "Selecting a color
	temperature*" on page 32 for details.
Lamp Power	Selects the projector lamp power between Normal, Economic and
	SmartEco modes.
	Black Level
	Sets the picture grayscale as 0 IRE or 7.5 IRE. See "Setting Black Level" on
	page 33 for details.
	Clarity Control
	See "Controlling image clarity" on page 33 for details.
Advanced...	Color Temperature Fine Tuning
	See "Setting a preferred color temperature" on page 33 for details.
	Gamma Selection
	See "Selecting a Gamma setting" on page 33 for details.
	Brilliant Color
	See "Adjusting Brilliant Color" on page 34 for details.
	Color Management
	See "Color Management" on page 34 for details.
Reset Picture Settings	Returns all settings in the Picture menus to the factory preset values. See
	"Resetting the picture mode" on page 31 for details.

42 Using the projector