Positioning your projector
Choosing a location
Your projector is designed to be installed in one of four possible installation locations.
Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment.
1. Front:
Select this location with the projector placed near the floor in front of the screen. This is the most common way to position the projector for quick setup and portability.
2. Front Ceiling:
Select this location with the projector suspended from the ceiling in front of the screen.
Purchase the BenQ Projector Ceiling Mount Kit from your dealer to mount your projector on the ceiling.
*Set Front Ceiling after you turn the projector on.
3. Rear:
Select this location with the projector placed near the floor behind the screen.
Note that a special rear projection screen is required.
*Set Rear after you turn the projector on.
4. Rear Ceiling:
Select this location with the projector suspended from the ceiling behind the screen.
Note that a special rear projection screen and the BenQ Projector Ceiling Mount Kit are required for this installation location.
*Set Rear Ceiling after you turn the projector on.
*To set the projector position:
1.Press MENU/EXIT on the projector or remote control and then press 
/ 
until the System Setup : Basic menu is highlighted.
2.Press 
/
to highlight Projector Position and press 
/ 
until the correct position is selected.
Positioning your projector | 13 |
