Lexicon PCM96 manual The Rear Panel, Power Jack, Ethernet Inputs, Midi In, Midi Thru, Midi Out

The Rear Panel

1 2 3 4 5

6 7

1. Power Jack

Standard 3-pin IEC power connector. 100-240V, 50-60Hz automatic switching to correct voltage range.

2. Ethernet Inputs

These RJ-45 connections are used to network PCM96 devices and control them via Ethernet.

3.MIDI IN

Receives MIDI information from other MIDI equipment such as master keyboard controllers, MIDI foot controllers, sequencers and synthesizers.

MIDI THRU

Passes any MIDI data received without change.

MIDI OUT

Transmits MIDI data to other equipment.

4.AES/EBU In/Out

AES/EBU format digital connectors conform to AES professional standards.

5. Analog In/Out

Output impedance is 30Ω, electronically balanced, and levels up to +20dBu maximum full scale.

6. FireWireTM Ports

Connect FireWireTM cables here. Either port can be used, with the other act- ing as Thru.

7. WORD CLOCK INPUT

This connection allows the PCM96 to lock to a master system clock. It is not terminated. For best results we recommend using “T” connectors when setting up a BNC Word Clock network and terminating the end of of this network with a 75 ohm BNC terminator.

5