27
Electronic emission notices
Federal Communications
Commission (FCC) compliance
information statement
The Lexmark 3100 Series
4476-K01 has been tested and
found to co mply with th e limits for a
Class B digital device, pursuant to
Part 15 of the FCC Rules.
Operation is subject to the following
two conditions: (1) this device may
not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause
undesired operation.
The FCC Class B limits are
designed to provide reasonable
protection against harmful
interference in a residential
installation. This equipment
generates, uses, and can radiate
radio frequency energy and, if not
installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause
harmful interference to radio or
television reception, which can be
determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the
receiving antenna.
• Increase the separation
between the equipment and
receiver.
• Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
• Consult your point of purchase
or service representative for
additional suggestions.
The manufacturer is not
responsible for any radio or
television interference caused by
using other than recommended
cables or by unauthorized changes
or modifications to this equipment.
Unauthorized changes or
modifications could void the user's
authority to operate this equipment.
Note:To assure compliance
with FCC regulations on
electromagnetic interference for
a Class B computing device,
use a properly shielded and
grounded cable such as
Lexmark part number 1329605
for parallel attach or 12A2405
for USB attach. Use of a
substitute cable not properly
shielded and grounded may
result in a violation of FCC
regulations.
Any questions regarding this
compliance information statement
should be directed to:
Director of Lexmark Technology &
Services
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
(859) 232-3000
Industry Canada compliance
statement
This Class B digital apparatus
meets all requirements of the
Canadian Interference-Causing
Equipment Regulations.
Avis de conformité aux normes
d’Industrie Canada
Cet appareil numérique de la
classe B respecte toutes les
exigences du Règlement sur le
matériel brouilleur du Canada.
European Community (EC)
directives conformity
This product is in conformity with
the protection requirements of EC
Council directives 89/336/EEC and
73/23/EEC on the approximation
and harmonization of the laws of
the Member States relating to
electromagnetic compatibility and
safety of electrical equipment
designed for use within certain
voltage limits.
A declaration of conformity with the
requirements of the directives has
been signed by the Director of
Manufacturing and Technical
Support, Lexmark International,
S.A., Boigny, France.
This product satisfies the Class B
limits of EN 55022 and safety
requirements of EN 60950.
The United Kingdom
Telecommunications Act 1984
This apparatus is approved under
the approval number NS/G/1234/J/
100003 for the indirect connections
to the public telecommunications
systems in the United Kingdom.
Japanese VCCI notice
ENERGY STAR
The EPA ENERGY STAR Office
Equipment program is a
partnership effort with office
equipment manufacturers to
promote the introduction of
energy-efficient products and to
reduce air pollution caused by
power generation.
Companies participating in this
program introduce products that
power down when they are not
being used. This feature will cut the
energy used by up to 50 percent.
Lexmark is proud to be a participant
in this program.
As an ENERGY STAR Partner,
Lexmark International, Inc. has
determined that this product meets
the ENERGY STAR guidelines for
energy efficiency.