Lexmark manual 4026-0XX Wrinkled Paper/Envelope/Transparency, Diagnostic Information

4026-0XX

Wrinkled Paper/Envelope/Transparency

	FRU	Action
1	Paper	Check the paper supply for wrinkled or damaged
		paper, out of specification paper, envelopes or
		transparency material. Correct as necessary.
2	Paper Path	Check the paper feed lift plate assembly, input
		sensor actuator, paper separators, paper feed
		rollers or anything in the paper path that might
		catch the paper or cause the paper to wrinkle.

Paper Never Leaves The Tray or Fails To Reach The Input Sensor

Note: Remove the Optional Second Paper Tray if installed before performing the following checks.

	FRU	Action
1	Paper	Check the paper supply for any paper, envelope,
		transparency, label, or index cards that may be
		causing a problem.
2	Paper Take-	Be sure the paper take-up solenoid is picking. If
	Up Solenoid	incorrect go to the “Paper Take-Up Solenoid
		Service Check” on page 2-32.
3	Paper Frame	Check the paper feed frame assembly for proper
	Assembly	operation. If incorrect go to the “Paper Feed
		Frame Assembly Service Check” on page 2-37.
4	D-Roll	Check the D-Roll assembly for proper operation.
	Assembly	If incorrect go to the “D-Roll Assembly Service
		Check” on page 2-16
5	Paper Lift	Check the paper lift plate assembly for proper
	Plate Assem-	operation. If incorrect, replace the paper lift plate
	bly	assembly.
6	Print Media	Check the print media selection lever on models
	Selection	06C and 06F for the correct setting. This is
	Lever	determined by the media being used ( labels,
	(Models 06C	card stock, paper, etc. ).
	and 06F)

Diagnostic Information 2-35