PostScript (PS) emulation | 16 |
= Supported |
|
X = Not supported |
|
Envelope sizes | Printer model |
Size name | Literal name | Size (mm) | Size (inches) | Size (points) | C746, C748 | X746, |
|
|
|
|
|
| X748 |
Commercial 10 | 4.125x9.5envelope | 104.8 x 241.3 | 4.125 x 9.5 | 297 x 684 |
|
|
International B5 | 176x250envelope | 176 x 250 | 6.93 x 9.84 | 499 x 708 |
|
|
International C5 | 162x229envelope | 162 x 229 | 6.38 x 9.01 | 459 x 649 |
|
|
International DL | 110x220envelope | 110 x 220 | 4.33 x 8.66 | 312 x 624 |
|
|
Other envelope | otherenvelope | 296.93 x 427.48 | 11.69 x 16.83 | 842 x 1212 |
|
|
Literal names supported
= Supported |
|
X = Not Supported |
|
Literal names | Printer model |
Literal name | Compatible literal name | C746, C748 | X746, X748 |
b5envelope | 176x250envelope | X | X |
c5envelope | 162x229envelope |
|
|
com10envelope | 4.125x9.5envelope |
|
|
dlenvelope | 110x220envelope |
|
|
monarcenvelope | 3.875x7.5envelope |
|
|
PostScript envelope tray support
If manualfeed in statusdict and the ManualFeed page device parameter are false when the printer receives one of the envelopetray operators listed in “Envelopetray operator selections” on page 17, then the following occurs:
•The printer sets the PageSize Policy to 0.
•The printer checks the active source to see if it matches the requested envelope size. If the sizes match, then the envelope is fed from the active source.
Note: The active source is the last source selected from the printer control panel or data stream.
•If the requested size and the size loaded in the active source do not match, then the sources are searched in the order defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary.
•If the requested media size is not found by the previous search, then the following search order is used:
–Envelope feeder
–Multipurpose feeder
