Lexmark X546DTN MFP, C544N/DN/DW/DTN PostScript envelope tray support, Literal names supported

= Supported
X = Not supported
Envelope sizes					Printer models
Size name	Literal name	Size (mm)	Size (inches)	Size (points)	C540n, C543dn,	X546dtn MFP
					C544n/dn/dw
					/dtn
otherenvelope	Other	296.93 x 427.48	11.69 x 16.83	841 x 842	X	X

Literal names supported

= Supported
X = Not Supported
Literal names	Printer models

Literal name	Compatible literal name	C540n, C543dn, C544n/dn/dw/dtn	X546dtn MFP
monarchenvelope	3.875x7.5envelope
com10envelope	4.125x9.5envelope
dlenvelope	110x220envelope
c5envelope	162x229envelope
b5envelope	176x250envelope

PostScript envelope tray support

If manualfeed in statusdict and the ManualFeed page device parameter are false when the printer receives one of the envelopetray operators listed in “Envelopetray operator selections” on page 16, then the printer:

•Sets the PageSize Policy to 0.

•Checks the active source to see if it matches the requested envelope size. If the sizes match, the envelope is fed from the active source.

Note: The active source is the last source selected from the printer control panel or data stream.

•If the requested size and the size loaded in the active source do not match, the sources are searched in the order defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary.

•If the requested media size is not found by the previous search, the following search order is used:

–Envelope Feeder

–Multipurpose Feeder

•If the requested size and type are not available from any automatic source, you are prompted to load the requested envelope size and type in the manual feed source.

•If the size is still not available, a configurationerror is issued and the print job is flushed.

If manualfeed or ManualFeed is true, the printer prompts you to load the requested size manually. If no manual feed exists on the printer, a rangecheck error message is generated

PostScript (PS) emulation

15