Sony KV-32V15 No picture screen not lit, no sound UseFACTORY PRESEt. page, Good picture, no sound

Additional Information

After trying the methods below, if the problem persists,

contact your nearest Sony dealer.

No picture (screen not lit), no sound UseFACTORY PRESEt. (page 10)

Make sure the power cord is connected

Securey.

,,#-Operate with the buttons on the TV.

,,,#Insert the battery in the remote commander with the correct polarity.

Replace the battery with a new one if it is weak.

-'_"Check to see if the TV/VIDEO setting is correct: when watching TV, set to TV, and when watching video tapes, set to VIDEO. Try another channel. It could be station trouble.

Poor or no picture (screen lit), good sound

-_ Use FACTORY PI_. ET. (page 10)

Adjust PICTURE in the VIDEO menu. (page

16)

,,,# Adjust BRIGHT in the VIDEO menu. (page

16)

,'#Check antenna/cable connections.

Make sure S VIDEO is set to ON in the SET UP menu, when watching video tapes with an S video type VCR.

Good picture, no sound

,,,_ Use FACTORY PRESET. (page 10) -,_Press MUTING so that "MUTING"

di_ppea_froms the screen. (page14)

•"#'Checkthe_ settingtheAUDIO menu.

(page 19)

•,_ Make sure SPEAKER is set to ON inthe

SPEAKER SWITCH menu. (page 20)

No color .

use FACTORY PRESET. (page 10) -,)'Adjust COLOR in the VIDEO menu. (page

16)

•-_Black and white programs cannot be seen in

color.

Only snow and noise appear on the screen •,_ Check the CABLE setting in the SETUP

menu. (page 12)

•'_'Check the antenna/cable connections. =,*'Make sure the channel is broadcasting

programs.

,,,t, Press TV to change the input mode. (K'V- 32V15/32V16/34V15C only) (page 14)

Dotted lines or stripes

"#' Adjust the antenna.

,,*'Move the TV away from noise sou__-essuchas cars, neon signs, and hair-dryers.

Double images or ghosts

"_ Use a highly directional outdoor antenna or a cable (when the problem is caused by reflections from nearby mountains or tall buildings).

Cannot operate menu

If the item you want to choose appears in black, you cannot select it. Press TV/VIDEO correctly.

Check the CABLE BOX CONTROL setting in the SET UP menu. If it is ON, you cannot operate AUTO SET UP or CH SET LIP.

Cannot receive upper channels (UHF) when

using an antenna

"_ Check if CABLE is OFF in the SET UP menu,

(page 12)

•,# Use AUTO SET UP or AUTO PROGRAM to

add receivable channels that are not presently

in TV memory. (page 10, 12)

Cannot receive any channels when using

cable "IV

Check if CABLE is ON in the SET UP menu.

(page

•'#'UseAUTO SET UP orAUTO PROGRAM to

addreceivablechannelsthatarenotpresently

in TV memory. (page 10, 12)

Remote commander does not operate

_ Battery could be weak. Replace a battery.

Make sure the TV's power cord is connected

securely to wall outlet.

,,_ Set the CABLE BOX/TV selector to TV when

operating your TV.

.,_ Are fluorescent lights too close to TV? Move

at least 3-4 feet away from TV.

Additional Information I 27