Contents |
|
Introduction | 1 |
Setup | 1 |
Step 1: Select a location for your printer adapter | 2 |
Step 2: Unpack your printer adapter | 2 |
Step 3: Prepare your printer | 3 |
Step 4: Raise the printer adapter antenna | 4 |
Step 5: Connect your printer adapter to your printer | 4 |
Step 6: Connect your printer adapter power supply | 5 |
Step 7: Make sure all indicator lights are on | 5 |
Step 8: Turn on your computer | 6 |
Step 9: Set up your printer adapter on the network | 6 |
Step 10: Configure your network printer | 12 |
Inkjet printers | 12 |
Laser printers | 17 |
Troubleshooting | 24 |
An indicator light is not on | 24 |
The Lexmark Printer Adapter Installation Software screen does not appear | 25 |
I cannot find the network settings of my computer’s wireless adapter | 25 |
My MAC address is not listed on the Select your N5 Wireless Adapter screen | 26 |
My network is not listed on the Connect to the network (automatic) screen | 26 |
iv | Contents |
Page 4
Image 4
