Step 3: Prepare your printer | 3 | |
1 | Unpack and set up your printer. For help, refer to the |
|
instructions that came with your printer. |
| |
|
| |
2 | To help configure your printer on the network: | 4 |
|
| |
Do not connect your printer to your computer; however, if you have already done so, disconnect the USB or parallel cable.
Do not install the printer software; however, if you have already done so, you do not need to uninstall it.
3
Place the printer next to your printer adapter.
Note: If necessary, disconnect the printer power supply, and then reconnect it at its new location.
Make sure the printer power light is on.
Note: Your printer may look different from the one shown.
