Configuring 802.1X Authentication

The information you must complete is dependent on the 802.1 X security mechanism you select. Some require user
names, passwords, and/or certificates. If your network contains multi ple access points with different modes of
authentication, then you can select and configure more than one authent ication mechanism.
1From the Configure 802.1X Authentication dialog , type the user name and password for the authenticat ion server.
2Confirm the password, and then check the selected authentication mechanism.
If you have selected Do this
EAPMD5, LEAP, or
MSCHAPv2
Proceed to the next step.
PEAP or EAPTTLS Click Install CA Certificate, and then type the path to the CA certificate, or click Browse to
locate the certificate file.
EAPTLS aClick Install Signed Certificate, and then type the path to the signed certificate, or click
Browse to locate the certificate file.
bClick Install CA Certificate, and then type the path to the CA certificate, or click Brows e
to locate the certificate file.
3Click OK, and then follow the instructions on the computer screen.
Installing the printer on an Ethernet network

Information you will need to set up the printer on an Ethernet network

To configure your printer for an Ethernet network, organize the fo llowing information before you begin:
Note: If your network automatically assigns IP addresses to comput ers and printers, continue on to installing the
printer.
A valid, unique IP address for the printer to use on the network
The network gateway
The network mask
A nickname for the printer (optional)
Note: A printer nickname can make it easier for you to identify your printer on the network. You can choo se to
use the default printer nickname, or assign a name that is eas ier for you to remember.
You will need an Ethernet cable to connect the printer to the network and an available port where the printer can
physically connect to the network. Use a new network cable when possible to a void potential problems caused by a
damaged cable.

Installing the printer on an Ethernet network

Before you install the printer on an Ethernet network, make sure that :
You have completed the initial setup of the printer.
Your network is set up and working properly.
Your computer is connected to your network.
Networking 108