Notes:
•Your port may be working fine, but certain conflicts can occur wit h multiple USB devices. Try disconnecting
one of your other USB devices.
•If the USB port on the computer is not working, then try using the o ther USB ports on the computer.
MAKE SURE THE USB CABLE IS WORKINGTry using a different USB cable. If you are using a cable longer than 10 feet, then try using a shorter cable.
Note: USB hubs, extension cables, port replicators, and docking sta tions may cause connection issues. Try
disconnecting these devices so that your printer is directly connec ted to your computer.
MAKE SURE YOU ARE USING THE CORRECT CD FOR YOUR PRINTER MODELCompare the printer model on the CD to the printer model on the printer. The numbers should either match exactly
or be within the same series.
If unsure, look for an updated version of the printer software on the Lexmark Web site. For more information, see
the printer User's Guide.
RECONNECT THE PRINTER POWER SUPPLY
1Turn off the printer.
Note: Make sure the printer is not in Sleep mode. Press and hold for three seconds to turn off the printer.
2Unplug the power cord from the wall outlet, and then pull out t he power cord from the power supply.
3After one minute, reconnect the power cord into the power sup ply, and then plug the power cord into the wall
outlet.
4Turn on the printer.
RUN THE INSTALLER AGAIN
1Close the installer.
2Remove the CD, a nd then restar t the computer .
3Insert the CD, and then run the installer again.
MAKE SURE YOUR COMPUTER IS ABLE TO ACKNOWLEDGE USB ACTIVITY ON THE USB PORTOpen the Device Manager to check if it has activity whenever a USB device is connected to a USB port:
1Click , or click Start and then click Run.
2In the Start Search or Run box, type devmgmt.msc.
3Press Enter, or click OK.
Troubleshooting 157