3Slide the width guide to the far right.
4 Flex the sheets or envelopes back and forth to |
loosen them, then fan them. Do not fold or |
crease the print media. Straighten the edges on |
•Follow the illustrations for loading the paper according to your options.
Simplex (single sided)
Closing the multipurpose feeder
1Remove print media from the multipurpose feeder.
2Push the extension tray in.
3Close the multipurpose feeder cover.
a level surface. |
5 Load the media in the tray. |
• Load paper or transparencies with the left |
edge of the stack against the stack height |
label and with the recommended print side |
faceup. |
• Load envelopes flap side down with the |
stamp area and flap on the left. The end of |
the envelope with the stamp area enters the |
multipurpose feeder first. |
Warning: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or
Duplex
6Slide the side guide toward the inside of the tray until it lightly rests against the edge of the media.
7Set the Paper Size and Paper Type for the multipurpose feeder to the correct value for the print media you loaded.
Copying
Making a copy
1Place the original document
Adjust the paper guides when using the ADF.
2Go on the numeric pad.
Note: If an LDSS profile has been installed, you may receive an error when attempting a quick copy. Contact your system support person for access.
Copying using the ADF
1Place the original document
2Touch Copy on the home screen, or use the numeric keypad to specify the number of copies you want.
After touching Copy or entering the number of copies, the touch screen will automatically change to the copy settings menu.