Lexmark X656 MFP, X652 MFP PostScript envelope size support, Tray selected with tray operators

setpagedevice

where x y are the PageSize in points.

Tray selected with tray operators

= Supported
X = Not supported		Printer models
Operator	Tray selected (corresponding	T650n/dn/dtn, T652n/dn/dtn,	X651 MFP, X652 MFP,
	image size is set)	T654n/dn/dtn	X654 MFP, X656 MFP,
			X658 MFP
a4tray	tray with A4-size paper
a5tray	tray with A5-size paper
b5tray	tray with B5-size paper
customtray	tray with custom-size paper	X	X
executivetray	tray with executive-size paper
foliotray	tray with folio-size paper
legaltray	tray with legal-size paper
lettertray	tray with letter-size paper
oficiotray	tray with oficio-size paper
statementtray	tray with statement-size paper

PostScript envelope size support

The literal names in “Envelope sizes supported” on page 15 are also supported as operators in userdict. These operators change the image size, but do not change the active paper source. Therefore, when these operators are used, part of the image may be clipped.

When these literal names are used as operators, it is equivalent to executing the following PostScript emulation sequence. The following example uses a 3.875 x 7.5 envelope.

<</Policies <</PageSize 7>> /PageSize [279 540]>> >>setpagedevice

PostScript (PS) emulation

14