Lexmark X656 MFP, X652 MFP, X654 MFP, X651 MFP, X658 MFP Supported paper and envelope dimensions

Legend:

I

Distance between the top and bottom edge of the physical page and the printable area in portrait, or distance between the left and right edge of the physical page and the printable area in landscape

Note: The tables that follow in this chapter list the page sizes and dimensions of each area labeled on the preceding diagram for all paper and envelope sizes your printer supports.

Supported paper and envelope dimensions

The following table lists the page sizes and print area dimensions for all supported paper and envelope sizes. For more information about the printable areas and logical pages for PCL emulation, see “Printable areas” on page 8.

Selection

Paper/envelope

Dimensions by area (pels)1

dimensions

Page size

Name

mm

inches

A

B

C

D

E

F

G

H

I

parameters

2

Paper

13, 613

12, 45, 612

26, 626

26, 626

24

1, 601

2, 602

3, 603

4 or 10

15

101

A5	148 x 210	5.83 x 8.27
JIS B5	182 x 257	7.2 x 10.1
Paper
A4 (198	210 x 297	8.3 x 11.7
mm)3
A4 (203	210 x 297	8.3 x 11.7
mm)3
A6	148 x 105	5.8 x 4.1
Executive	184 x 267	7.25 x 10.5
Letter	216 x 279	8.5 x 11
Legal	216 x 356	8.5 x 14
Folio	216 x 330	8.5 x 13
Statement	139.7 x 215.9	5.5 x 8.5
Universal	216 x 356	8.5 x 14

3496	4960	3196	4720	142	118	0	100	100
4300	6070	4000	5830	150	120	0	100	100
4960	7014	4676	6778	142	118	0	80	100
4960	7014	4800	6778	80	118	0	80	100
2480	3496	2199	3260	142	118	0	100	100
4350	6300	4050	6060	150	120	0	100	100
5100	6600	4800	6360	150	120	0	100	100
5100	8400	4800	8160	150	120	0	100	100
5100	7800	4800	7560	150	120	0	100	100
3300	5100	3000	4860	150	120	0	100	100
1800–	1800–	1500–	1500–	150	120	0	100	100
51004	85024	48004	82624

1Pel dimensions are for 600 dpi.

2Page Size Parameters are explained in the Page Control table in the PCL chapter in the Printer Language and Interfaces Technical Reference.

3The width of the logical page for A4 paper can be changed from the printer control panel or your software application.

4For the Universal paper size, the area dimensions are listed in pel ranges.

5Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same logical paper size as ID 100 (compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the Lexmark 4039.

Note: The explanation of the printable area assumes the Print Area menu item is set to Normal. For more information, see “Print Area Menu Item” in the PCL chapter in the Printer Language and Interfaces Technical Reference.

Printer Control Language (PCL) page formatting

9