Lexmark X85X Loading the 2000-sheethigh capacity feeder, Loading the 2000-sheetdual input trays

Note: Make sure the print media is below the max fill line. Overloading may cause jams.

6Slide the width guides until they lightly rest against the edge of the media.

1Pull out the tray.

2Squeeze the front guide tab, and slide the guide to the correct position for the size media you are loading.

4Load print media in the tray with the print side up.

Note: Make sure the print media is below the max fill line on the rear guide. Overloading may cause jams.

5Insert the tray into the MFP.

Loading the 2000-sheet high capacity feeder

1Pull out the tray.

7Set the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size and MP Feeder Type) to the correct value for the print media you loaded.

Loading the 2000-sheet dual input trays

The 2000-sheet dual input drawer includes two trays: an 850-sheet tray and an 1150-sheet tray. Although the trays are different in appearance, they both load the same way.

3 Flex the sheets back and forth to loosen them, then fan them. Do not fold or crease the print media. Straighten the edges on a level surface.

2 If loading print media with a different width or

length, adjust the width and length guides.