DISCONNECT AND RECONNECT POWER SUPPLY
1Press 
to turn off the printer.
2Disconnect the power cord from the wall outlet.
3Remove the power supply from the printer.
4Reconnect the power supply to the printer.
5Plug the power cord into the wall outlet.
6Press 
to turn on the printer.
REMOVE AND REINSTALL THE SOFTWARE
If you encountered problems while installing, or if your printer does not appear in the printers folder or as a printer option when sending a print job, then try uninstalling and reinstalling the software.
Removing and reinstalling the software
If the printer is not functioning properly, or if a communications error message appears when you try to use the printer, you may need to remove and reinstall the printer software.
Using Windows
1Do one of the following:
•In Windows Vista, click 
.
•In Windows XP, click Start.
2Click Programs or All Programs, and then select the printer program folder from the list.
3Select Uninstall.
4Follow the instructions on the computer screen to remove the printer software.
5Restart the computer before reinstalling the printer software.
6Click Cancel on all New Hardware Found screens.
7Insert the installation CD, and then follow the instructions on the computer screen to reinstall the software. If the install screen does not appear automatically after you restart your computer, do one of the following:
In Windows Vista: a Click 
.
b Locate the Start Search box.
c Type D:\setup.exe, where D is the letter of your CD or DVD drive.
In Windows XP: a Click Start Run.
b Type D:\setup.exe, where D is the letter of your CD or DVD drive.
39
