Lexmark Z600 manual Solving printer software installation problems

Models: Z600

1 69
Download 69 pages 32.11 Kb
Page 50
Image 50

Is the printer set as the default printer?

To set the printer to be the default printer:

1Click Start Settings Printers

2Right-click the Lexmark Z600 Series and make sure that Set as Default is selected.

Is your printer connected directly to your computer? If it is connected through an external device, such as a USB hub, switch box, scanner, or fax machine, follow these steps:

1Disconnect your printer from any external devices.

2Connect your printer directly to your computer with a USB cable.

3Follow these instructions to print a test page.

a Open the Lexmark Solution Center. For help, see page 8. b From the Maintenance tab, click Print a Test Page.

If the test page prints, the problem may be with your external devices, not your printer. Check the documentation that came with your external devices for help.

If the test page does not print, refer to the printer software Help for further troubleshooting information.

Solving printer software installation problems

If the printer software does not install properly, a communications error message appears when you try to print. You may need to remove the printer software, and then reinstall it.

When I insert the printer software CD, nothing happens.

1Close all open software programs.

2Restart your computer.

Solving printer software installation problems

50

Page 50
Image 50
Lexmark Z600 manual Solving printer software installation problems, When I insert the printer software CD, nothing happens