Section 4: Safety Guidelines and Warranty Information
108 4A: Safety
Specific Absorption Rates (SAR) for Wireless Phones
The SAR is a value that corresponds to the relative amount of RF
energy absorbed in the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing,
measuring and calculation process. It does not represent how
much RF the phone emits. All phone models are tested at their
highest value in strict laboratory settings. But when in
operation, the SAR of a phone can be substantially less than the
level reported to the FCC. This is because of a variety of factors
including its proximity to a base station antenna, phone design
and other factors. What is important to remember is that each
phone meets strict federal guidelines. Variations in SARs do not
represent a variation in safety.
All phones must meet the federal standard, which incorporates
a substantial margin of safety. As stated above, variations in
SAR values between different model phones do not mean
variations in safety. SAR values at or below the federal standard
of 1.6 W/kg are considered safe for use by the public.
The highest reported SAR values of the 1200 are:
PCS mode (Part 24E) - Head: 0.830 W/kg; Body-worn: 0.304 W/kg
FCC Radiofrequency Emission
This phone meets the FCC Radiofrequency Emission
Guidelines. FCC ID number: BEJLX1200. More information on
the phone's SAR can be found from the following FCC Web site:
http://www.fcc.gov/oet/fccid.