TroubleshootingCh_klist
Tr oubIes hooting CheckIist
_r_ _nti-ol
_='ft w_
Power is suddenly
turned off
• Check to see if there is any object between the product and the
remote control causing obstruction.
° Are batteries ins_llod with correct _larity (+ to +, -to -)?
° Correct remote operating mode set: TV, VCR etc.?
• Install new batteries.
* Is the sleep timer set?
° Check the power control settings. Power interrupted
.No broadcast on station tunod with Auto off activatod.
J
The video function does not worko
No picture &
No sound
Picture ap_ars
slowly after
switching on
No or poor
color
or poor picture
Horizontal/vertical
bars or picture
P_r r_tion on
some channels
Lines or streaks
in pictures
•Check whether the product is turned on.
• Try another channel. The problem may be with the broadcast.
° Is the _wer cord insertod into wall power outlet?
° Check your antenna direction and/or location,
° Test the wall power outlet, plug another product's _wer cord into the
outlet where the product's power cord was pluggod in.
•This is normal the image is mutod during the product startup
pr_ess. Please contact your service center, if the picture has not
appeared after five minutes.
• Adjust Color in menu option.
• Keep a sufficient distance between the product and the VCR.
° Try another channeL. The problem may' be with the broadcasL
° Are the vid_ cables installed properly?
• Activate any function to restore the brightness of the picture.
• Check for I_al interference such as an electrical appliance
or power tool..
° Station or cable product experiencing problems, tune to another station.
- Station signal is weak, reorient antenna to receive weaker s_tion.
•Check for sources of possible interference.
° Ch_k antenna (Change the direction of the antenna).