LG Electronics 206-4071 manual Table of Contents / Setup Checklist

Table of Contents / Setup Checklist

Warnings	. . 2	Configure the Laptop / Tablet	. . . . . . 8
Important Safety Instructions	3 - 4	Configure the Channel Lineup	. . . . . . 9
Table of Contents	. . 5	Connect FMA-100 to the Hotel’s Distribution Resources /
Setup Checklist	. . 5	Troubleshooting	. . . . . 10
FTG Management Appliance Overview	. . 6	Glossary of Terms	. . . . . 11
FMA-100 Installation Procedures	. . 7	Warranty	Back Cover

Setup Checklist

Installation and configuration of the FMA-100 requires the following hardware, tools and software.

•FMA-100

•Manual

•Warranty sheet

•75-ohm coaxial terminator (for the FMA-100 RF In port)

•7 foot Ethernet crossover cable (for laptop or tablet access)

•Low pass filter (6MLP-50)

•Laptop or tablet with Ethernet port*

•Ethernet straight-through cable (for hotel network access)*

•Coaxial cable barrel adapter*

•Coaxial jumper cables* (Use jumper cable(s) to protect filter from damage)

•RF coaxial cable barrel*

•Termcode**

-Version 2.58 or higher for HC11 terminals

-Version 6.0 or higher for HC12 terminals

*These items are not included in the FMA-100 shipping container but are necessary to configure and install the FMA-100.

**Terminals installed at sites using the FMA-100 must have the appropriate version of termcode loaded depending on the terminal type.

206-4077 P A G E 5