PAGE 9
206-4077
1. Select the Configure Channel Lineup link. A login screen will
appear.
2. Type lnet in the User name field.
3. Type the appropriate password in the Password field.
4. Select the OK button.
5. Use the Channel Select drop-down list to select the channel
range to configure.
Note: Up to 100 channels can be configured in the FMA-100,
but only 20 channels can be viewed or configured at a time.
6. Select the Go button to display the selected channel range.
7. Add the FTG channels to the lineup.
• Select the appropriate tuning type from the Tuning Type
drop-down list.
• Type the analog modulator in the Analog Mod field,
if applicable.
• Type the digital modulator in the Digital Mod field,
if applicable.
• Type the digital stream in the Digital Stream field,
if applicable.
• Type the FTG channel’s OSD (On Screen Display) in the
OSD field.
- The OSD and Call Letters fields (combined) can have a
max of 17 characters including spaces.
- If a channel has both OSD and Call Letters they will be
separated by a dash (-) on the TV’s OSD. Note: The dash
will count as one of the 17 characters that can be used.
• Type the station’s call letters in the Call Letters field.
• Select Enabled from the State drop-down box.
• Repeat these steps for each additional FTG channel listed
on the page.
8. Select the Save Configuration button after all the FTG
channels on the page have been configured.
Warning: The Save Configuration button must be selected before
configuring or editing the channel lineup for a different
channel range! If the Save Configuration button is not
selected before configuring a different page of chan-
nels, the channel configurations for that page will be lost!
9.Repeat the channel configuration steps for another channel
range until all FTG channels are configured.
10. Type the first channel the TV should access when it is pow-
ered on in the Startup Channel field.
Notes:
• If the Startup Channel is disabled, the lowest enabled
channel will default as the new Startup Channel.
• Auxiliary sources should not be configured as the Startup
Channel.
11. Select the Save Configuration button.
12. Wait for the page to refresh/reload.
13. Select the View Channel Lineup link to return to the Current
Channel Lineup screen.
Configure the Channel Lineup