LG Electronics 22LG3DDH VCR Setup, Antenna Connection, Set VCR output switch to 3 or 4 and then

EXTERNAL EQUIPMENT SETUP

VCR SETUP

■To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

■If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all TVs and is not covered by warranty.

EXTERNAL EQUIPMENT SETUP

Antenna Connection

1. How to connect

1Connect the RF antenna out socket of the VCR to the ANTENNA IN socket on the TV.

2Connect the antenna cable to the RF antenna in socket of the VCR.

S-VIDEO	VIDEO	L	R	ANT OUT
OUTPUT				ANT IN
SWITCH

Wall Jack 2

1

ANTENNA IN

2. How to use

■ Set VCR output switch to 3 or 4 and then	Antenna
tune TV to the same channel number.

■Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

22