Installation
DTV Setup
- To watch digitally broadcast programs, purchase and con- nect a digital
COMPONENT (DTV/DVD IN) 
AUDIO 
PC INPUT | ANT IN ( 75 ) PC SOUND |
| H/P |
VIDEO IN1 | |
|
Connections
Connect the digital
Viewing Setup
1.Turn on the digital
2.Use the INPUT button on the remote control to select
Component.
| Y |
| PB |
| PR | (R) AUDIO (L) | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DTV Receiver (Set-top Box)
Using Headphones
-Plug headphones in to H/P jack as shown.
-Adjust sound level to a headphone using the volume (F, G) buttons. While you are listening to sound through a headphone(s), TV speakers will not be heard.
PC Setup
ANT IN (
75 
) PC SOUND
H/P
- After setup, be sure to select PC source on TV.
Connections
1.Set the monitor output resolution on the PC before connecting to the TV.
2.Connect the TV to the PC with the PC cable.
3.Connect the PC audio output to the TV's PC SOUND input.
Viewing Setup
1.Turn on the PC.
2.Use the INPUT button on the remote control to select PC.
Monitor Display Specifications
|
|
|
|
|
|
|
|
|
|
|
|
| Horizontal |
| Vertical |
| MODE |
| Resolution | ||||
|
|
| Frequency(kHz) |
| Frequency(Hz) | ||
|
|
|
|
|
| ||
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| VGA |
| 640x480 | 31.4 | 60 | ||
| SVGA |
| 800x600 | 37.8 | 60 | ||
| XGA |
| 1024x768 | 48.3 | 60 | ||
| WXGA |
| 1280x768 | 47.7 | 60 | ||
| WXGA |
| 1360x768 | 47.6 | 60 | ||
|
|
|
|
|
|
|
|
COMPONENT (DTV/DVD IN) 
AUDIO 
PC INPUT | ANT IN ( 75 ) PC SOUND |
| H/P |
VIDEO IN1 |
NOTES
a. For optimum picture quality, use standard 1360x768@60Hz computer output at a 60Hz refresh rate . Using other formats (VGA, SVGA, etc.) or refresh rates may result in reduced picture quality. (To change the computer video output format, please refer to the operating manual for the computer you are using).
b. If the message “Out of range” appears on the screen, adjust the PC output to a format listed in the ‘Monitor Display Specifications' chart above.
c. The synchronization input form for Horizontal and Vertical frequencies is separate.
DPM (Display Power Management) mode
If the PC goes to power saving mode, the monitor automatically switches to DPM mode. If you don’t use the PC cable provided, DPM mode may not work.
16
