ENGLISH
20CUSTOMIZING SETTINGS
SUPER ENERGY SAVING
1Press 
button on the bottom of the Monitor set to
display the SUPER ENERGY SAVING OSD.
2 Set the options by pressing the ► buttons.
Each option is explained below.
SUPER ENERGY SAVING | Description |
High | Enables SUPER ENERGY SAVING you can save energy with this energy- high efficient function. |
Low | Enables SUPER ENERGY SAVING you can save energy with this energy- low efficient function. |
Off | Disables SUPER ENERGY SAVING. |
NOTE
y yTOTAL POWER REDUCTION: How much power is saved while using the monitor.
y yTOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2. y ySAVING DATA(W/h)
| 482 mm | 546 mm | 584 mm |
| (19 inch) | (21.5 inch) | (23 inch) |
|
|
|
|
SUPER SAVING (High) | 3 W/h | 4 W/h | 4 W/h |
|
|
|
|
SUPER SAVING (Low) | 1 W/h | 2 W/h | 2 W/h |
|
|
|
|
y ySaving Data depends on the Panel. So,those values should be different from each panel and panel vendor.If option of Super Energy Saving is High or Low, monitor luminance become higher or lower depend on source.
y yLG calculated these values by using “broadcast video signal” (including broadcast video: IEC 62087)
y ySUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function.
y yIf option of Super Energy Saving is High or Low, Picture Mode will automatically be Custom and Reader Mode will automatically be Reader Off.
