LG Electronics 23MB35PM, 22MB35PM Adjusting the stand height, Using the Kensington locking device

8ASSEMBLING AND PREPARING

ENGLISH

Adjusting the stand height

1Place the monitor mounted on the stand base in an upright position.

2Remove the tape attached at the bottom rear of the stand body, then pull out the locking pin.

Stand Body

‌

Tape

Locking Pin

Using the Kensington locking device

The connector for the Kensington lock is located on the rear of the monitor.

For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com.

Connect the monitor to the table with the Kensing- ton lock cable.

3The height can be adjusted up to 110 mm.

19MB35PM 22MB35PM 23MB35PM

110.0mm

CAUTION

y yOnce the pin is removed, it is not necessary to re-insert it to adjust the height.

WARNING

y yDo not put your finger be- tween the screen and the base (chassis) when adjust- ing the screen's height.

NOTE

y yUsing the Kensington lock is optional. The accessories can be purchased at your local electronics store.