A-34
PREPARATION
PREPARATION
FRONT PANEL CONTROLS
NOTE
TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
CAUTION
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-
ments of glass, or the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
Image shown may differ from your TV.
SPEAKER
OK
PROGRAMME INPUT
VOLUME MENU POWER
Only 19/22/26LE3***, 22/26LE5***
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
The LED is off while the TV remains on.
Touch Sensor
You can use the desired button
function by touching.
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
Only 32/37/42LE4***
VOLUME MENU POWER
OK
PROGRAMME INPUT
Power/Standby Indicator
Note: You can turn the Power Indicator on
or off in the OPTION menu.
Only 32LE3***, 32/37/42/47/55LE5***
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
Remote Control Sensor
Only 32/37/42LE4***, 32/37/42/47/55LE5***
Only 32/37/42LE4***
Power/Standby Indicator
Note: You can turn the Power Indicator on
or off in the OPTION menu.
P
MENU
INPUT
OK
/ I
Downloaded From TV-Manual.com Manuals