24
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
The following values are needed in order to search all available programmes quickly and correctly.
The commonly used values are provided as "default".
However, for correct settings, please inquire of the cable service provider.
When running Auto Tuning in DVB cable mode, selecting Full will search through all frequencies to
find available channels.
In the case when the programme is not searched by selecting the Default, perform the searching by
selecting the Full.
However, in the case when the programme is searched by selecting the Full, the Auto Tuning time can be
taken too much.
Frequency : Enter a user-defined frequency.
Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as
modem sends symbols to a channel).
Modulation : Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier).
Network ID : Unique identifier allocated for each user.
Start Frequency
: Enter a user-defined start frequency range.
End Frequency
: Enter a user-defined end frequency range.
Downloaded From TV-Manual.com Manuals