LG Electronics 26-3DCH-UA, 32-3DCH-UA setup guide Channel Banks Overview

Channel Banks Overview

Channel Banks Note: Disable all Aux sources in the Installer menu that will not be made available to the end user.

Channel Banks Overview

Purpose of Channel Banks: Allows the institution administrator to control access to patient in-room TV programming. A channel bank can be enabled for a patient for a pre-determined fee. For Banks 1-2 and 3, the institution can create programming lev- els. Each level would offer a custom channel line-up. Top tier would be the most pro- gramming (premium etc.), 2nd tier=lesser programming, 3rd tier=basic programming etc. Channel Bank 4 would display the ‘Inactive TV Call Attendant’ message when the TV is turned on. The administrator could activate Banks 1-2 or 3 depending on the programming tier selected by the patient. When the patient leaves the hospital, the administrator can then select Bank 4 to reinstate the Inactive TV message.

Channels Available Charts

All channels found in the channel search are included in all channel banks. Default is for all channels to be active in channel banks 1-2-3 and 4. Create channel banks charts similar to the examples on the following pages. Show on the channel bank chart, the status for each channel in all channel banks. This then becomes the patient entertainment programming offerings plan.

Channel Banks Setup

Operating the Channel Banks menu.

Note: Channel banks can only be set up after the 2-5-5+Menu procedure has been completed. See remote key functions for channel banks menu on the following page.

Channel Status Options Available for Channel Banks

In the Ch Preview-Channel Banks menu, use the channel up-down arrows to go to a channel and the Left-Right arrows to select the channel status. See channel status chart.

Inactive TV Setup

Go to Channel Bank 4. Select ‘Normal Delete’ for all channels. When the TV is powered on by the patient, the ‘Inactive TV Call Attendant’ message will appear on the screen and after a few moments the TV will turn itself off. With the Installer remote, the administrator can activate Banks 1, 2 or 3 depending on the entertainment program- ming tier selected by the patient. When the patient leaves the hospital, the adminis- trator can then select Bank 4 to reinstate the ‘Inactive TV’ message.

CHANNEL PREVIEW - BANK 1

CH 011-001 NORMAL-ADDED

Enter -> Change

CC ->VCHIP Menu Ch. Preview -> Exit

Channel Bank Setup Menu

MUTE POWER

CH

BANK PREVIEW GUIDE

SAP INFO CC

CH

OK

VOL VOL

CH

FLASHBK

TIMER MENU ALARM

ADJ

ADJ ADJ ADJ

BED1 BED2

Note: Default setting for Aux sources is to be active in the Installer menu. The Aux sources will appear between the highest Analog and lowest Digital channel number in the channel scan with Channel Up/Down. If the Aux sources will not be used, it is advisable to set them to 000 (Off) before doing 2-5-5 + Menu. After doing 2-5-5 + Menu, the only way to turn the Aux sources off so they will not appear in the channel scan, is to go to the Channel Bank menus and select ‘Normal Delete’.

Refer to Installer menu items: 34, 35, 38, 39 and 87.

3140OSKZ003AR6

Use to access Ch Preview Menu

P A G E 2 4 206-4071