LG Electronics 27EC33V owner manual YySelf Image Setting Function, Yy‘AUTO’ Function

USING THE MONITOR SET 11

CAUTION	Self Image Setting Function
	Press the power button on the bottom panel to

yyConnect the signal input cable and tighten

it by turning the screws clockwise.

yyDo not press the screen with your finger for a long time as this may result in temporary distortion on the screen.

yyAvoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.

turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed automatically. (Only supported in Analog Mode)

ENGLISH

NOTE

yyWhen you want to use two PC in our Monitor, please connect the signal cable(D-SUB/ DVI-D/HDMI) respectively in Monitor set.

yyIf you turn the Monitor set on while it is cold, the screen may flicker. This is normal.

yySome red, green, or blue spots may appear on the screen. This is normal.

NOTE

yy"Self Image Setting" Function.

This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode)

yy‘AUTO’ Function.

When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode)