LG Electronics 29UM65-P Installing to a wall

ENG

ENGLISH

ASSEMBLING AND PREPARING

To install the monitor to a wall, attach a wall mount-

ing bracket (optional) to the back of the monitor.

Make sure that the wall mounting bracket is securely

fixed to the monitor and to the wall.

1 Use the screws and wall mounting bracket that

comply with the VESA standard.

2 Screws which are longer than the standard

length may damage the inside of the monitor.

3 A non-VESA standard screw may damage the

product and cause the monitor to fall. LG Elec-

tronics is not liable for any accidents relating to

the use of non-standard screws.

4 VESA compatible only with respect to screw

mounting interface dimensions and mounting

screw specifications

5 Use it according to the VESA standard as speci-

fied below.

y784.8 mm or less

* Thickness of the wall mount plate: 2.6 mm

* Fastening screw: Diameter 4.0 mm x Pitch 0.7

mm x Length 10 mm

y787.4 mm or greater

Use the wall mount plate and screws that con-

form to the VESA standard

Installing to a wall

Install the monitor at least 10 cm away from the

wall and leave about 10 cm of space at each side

of the monitor to ensure sufficient ventilation. De-

tailed installation instructions can be obtained from

your local retail store. Please refer to the manual

to install and set up a tilting wall mounting bracket.

10 cm

yUnplug the power cord before moving or in-

stalling the monitor to avoid electric shocks.

yInstalling the monitor on the ceiling or on a

slanted wall may result in the monitor falling

off, which could lead to injury. Please use

the genuine LG wall mounting bracket. For

more information, contact your local retail

store or a qualified installer.

y Applying excessive force when fastening

screws may cause damage to the moni-

tor. Damage caused in this way will not be

covered by the product warranty.

yUse the wall mounting bracket and screws

that conform to the VESA standard. Dam-

age caused by the use or misuse of inap-

propriate components will not be covered

by the product warranty.

yScrew length from outer surface of back

cover should be under 8mm.

yUse the screws specified by the VESA stan-

dard.

yThe wall mount kit includes the installation

guide and all necessary parts.

yThe wall mounting bracket is optional. The

accessories can be purchased at your local

retail store.

yThe length of the screw may differ for each

wall mounting bracket. Ensure the correct

length screw is used.

yFor more information, please refer to the

user manual for the wall mounting bracket.

CAUTION

NOTE

VESA (A x B) 75 x 75

Stand Screw M4 x 10

Required Screws 4

: M4 x L10

Wall mount Pad

Back Cover

Standard screw

Max.8mm