10Using LG EzSign 2.0 Editor
Exporting to TV
Using a wireless network, you can transfer content files saved on a PC to the TV without having to connect a USB device. To use this function, you must first connect a wireless dongle to the TV in order to connect to the wireless network. 12 Page See the network configuration.) The PC must also be connected to a router via a wired or wireless connection.
2Connect the PC to the router via a wireless/ wired connection.
3In EzSign 2.0 Editor, select Send To TV.
USB
PC Editor S/W
NOTE
ꔈꔈ If a wireless dongle is used, EzSign content files saved on a USB device cannot be played.
ꔈꔈ If a content file is transferred via the wireless dongle, the file is immediately saved in the TV memory.
ꔈꔈ The connection may not be established depending on wireless signal interference or strength.

4Select TV Auto Scan to automatically search for the TV connected to the router. You can manu- ally enter an IP by selecting
+ Add TV for connection.
IMPORTANT
ꔈꔈ If there is wireless signal interference, check whether the router is operating normally. When there is a wall or another router between the router and the TV, it may not work properly so remove any obstacles before installing it.
ꔈꔈ When multiple TVs are connected to a single router, make sure that the rounder is working properly before setting a network.
ꔈꔈ
ꔈꔈ External Internet environment is not supported. ꔈꔈ A password must be set for the router to pre- vent other devices from being connected.
ꔈꔈ When content files in the existing playlist 1 are played on TV, contents files in another playlist 2 can be sent to the TV. When it happens, the files in the playlist 2 are played as scheduled by replacing the files being played without a pop- up window displayed.
1Connect a wireless dongle to the TV which is to be connected to the router. You can check the network connection status from the TV's net- work menu. (The network must be connected to the minimum gateway.)
5Select the TV you want to connect and then select Send to Selected TV.
395FDKSJ34

6When the transfer is complete, the transferred content file is immediately played on TV.
IMPORTANT
ꔈꔈ The TV name will first be displayed as its serial number. You can change it as desired (up to 16 characters) by clicking the cell.