LG Electronics 32/37/42/47/55LV5 Stand Body on, Fix the 4 bolts securely using the holes

PREPARATION

PREPARATION

STAND INSTALLATION

■Image shown may differ from your TV.

When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

1	Carefully place the TV screen side down
	on a cushioned surface to protect the

screen from damage.

BACK COVER FOR WIRE ARRANGEMENT

■Image shown may differ from your TV.

1Secure the power cord with the Cable Holder on the TV back cover.

It will help prevent the power cable from being removed by accident.

2	Assemble the parts of the Stand Body with
	the Stand Base of the TV.
	At this time, tighten the screws that hold the
	Stand Body on.
		Stand Body
	M4 X 22
			Stand Base
3	Fix the 4 bolts securely using the holes in

the back of the TV.

M4 X 12

4	Assemble the parts of the Stand Rear
	Cover with the TV.

Stand Rear

Cover

	Cable Holder
2	After connecting the cables as necessary,
	install Cable Holder as shown and bundle

the cables.

Cable Holder

SWIVEL STAND

■Image shown may differ from your TV.

After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.

A-30

Downloaded From TV-Manual.com Manuals