LG Electronics 26/32LD33, 32/37/42/47LD4 Attaching the TV to a Desk, Not Using DESK-TYPE Stand

BACK COVER FOR WIRE ARRANGEMENT

■Image shown may differ from your TV.

1Connect the cables as necessary.

To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

2Open the Cable Management Clip as shown.

Cable Management Clip

3 Fit the Cable Management Clip as shown.

ATTACHING THE TV TO A DESK

(Only 32/37/42LD4***, 26/32LD32**, 26/32LD33**)

■Image shown may differ from your TV.

The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.

1-Screw

(provided as parts of the product)

Stand

Desk

PREPARATION

NOTE

►Do not use the Cable Management Clip to lift the TV.

-If the TV is dropped, you may be injured or the TV may be damaged.

WARNING

►To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.

NOT USING THE

DESK-TYPE STAND

■Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover.

Insert the Protection Cover into the TV until clicking sound.

Protection Cover

A-19

Downloaded From TV-Manual.com Manuals