LG Electronics 42LC2D(B) Select method of Panel size, ADC Calibration, Panel size selection

3)Connect RS232 cable(Use Download Jig and general RS- 232C Twisted Serial Cable).

*Before upgrading "Hudson flash memory", push the switch on the download jig ‘inside’.

4)Operate LGIDS.

5)Select "Hurricane" and "ALL" on Model dialog and check your connection in Communication dialog.

(If your connection is ‘NG’, then set your PORT (COM1, 2, 3,…) correctly. If your connection has completed, you can

see Ready )

6)First, select proper Batch file(*.flm) for each model at [ROM Download] => [Batch File].

Second, select proper RAM file(*.hex) for each model at [ROM Download] => [RAM File].

Third, select roper Flash File(*.hex) for each model at [ROM Download] => [Flash File].

7) Click the [Download] button.

It means the completion of the Hudson download if all items show 'OK' and Status is changed by 'PASS' at the lower right corner of the window.

Before AV ADC Calibration, should be executed the

"Panel size selection

5.Select method of Panel size

5.1Press ADJ Key in the Adjust remocon

5.2Select "Panel Control" by using ▲/▼ (CH+/-) key, and press(ENTER)

5.3Select "Panel Size", and change the panel size among 32, 37, 42 according to the inch of model name.

(If the model name is 37LC2D-EC, change the Panel size from default value to 37.)

5.4After changing the panel size, push the EXIT Key

6.ADC Calibration

ADC	RF/AV/S-VIDEO		Component	RGB-PC
MSPG925F	PAL		Model:217 (720P)	Model: 37
	INPUT SELECT	AV4	Pattern:33	(1024*768
	Model: 202 (PAL-BGDHI)		720P/60Hz 100%	60Hz)
	Pattern: 33		Color Bar	Pattern: 33
	PAL 100% Color Bar

=> Caution: -System control RS-232 Host should be "PC" for adjustment.

Before AV ADC Calibration, execute the "Panel size selection"

- 14 -