LG Electronics 19LD350 Downloaded From TV-Manual.com Manuals, Acknowledgementc, f Set, Data Cr

01.Power (Command: k a)

To control Power On/Off of the TV.

Transmission[k][a][] [Set!D][ ][Data][Cr]

Data 00: Power Off Data 01 :Power On

AcknOwledgement [a][ ] [Set ID] [ ] [OK/NG] [Data] [x] In a like manner, if other functions transmit 'FF'data based on this format, Acknowledgement data feedback presents status about each function.

Note: In this model, TV will send the Acknowledge after power on processing completion.

There might be a time delay between command and acknowledge.

02.Input Select (Command: x b) To select input source for TV.

Transmission[x][b][][SetlD][	] [Data] [Cr]
Data 00: DTV (Antenna)	Data	01	: DTV	(Cable)
Data 10: Analog (Antenna) Data 11: Analog (Cable)
Data 20:AV/AV1	Data	21	: AV2
Data 40: Component	Data 60: RGB-PC
Data 90:HDMI/HDMI1	Data 91		: HDMI2
Acknowledgement [b][ ][Set	ID][	][OK/NG]		[Data] [x]

*Use the feature depending on your model.

03.Aspect Ratio (Command: k c) To adjust the screen format.

TransmissiOn [k] [c] [] [Set ID] [] [Data] [Cr]

Data 01:4:3	09:	Just scan
02:16:9	10:	Cinema Zoom1

04:Zoom

06: Set by program		1 F: Cinema Zoom16
Acknowledgement[c][	][set	ID][ ][OK/NG] [Data] [x]

04.Screen Mute (Command: k d) To select screen mute on/off.

Transmission [k] [d][] [Set ID] [] [Data] [Cr]

Data 00: Screen mute off (Picture on), Video-out Mute off

Data 01 : Screen mute on (Picture off)

Data 10: Video-out Mute on

Acknowledgement[d][] [Set ID] [ ] [OK/NG] [Data] [x] In case of Video-out Mute on only, TV will display On Screen Display (OSD). But, in case of screen mute on, TV will not display On Screen Display (OSD).

05.Volume Mute (Command: k e) To control volume mute on/off.

Downloaded From TV-Manual.com Manuals

You can also adjust mute using the MUTE button on remote control.

Transmission [k] [el[ ][Set ID][ ][Data] [Cr]

Data 00: Volume mute on (Volume off)

Data 01: Volume mute off (Volume on)

Ackn6wledgemen_ [e][ ][set ID][ ][OK?NG] [Data] [x]

06.Volume Control (Command: k f) To adjust volume.

You can also adjust volume with the volume buttons on remote control.

Transmission [k]	[f'] [][Set	ID][]	[Data] [Cr]
Data Min: 00 -	Max: 64 (*transmit by Hexadecimal code)
_Refer to 'Realdata mapping'.
Acknowledgement[f] []		[Set ID][]	[OK/NG] [Data] [x]

07.Contrast (Command: k g) To adjust screen contrast.

You can also adjust contrast in the PICTURE menu. TransmissiOn[k] [g] [] [Set ID] [] [Data] [Cr]

Data Min: 00 - Max: 64 (*transmit by Hexadecimal code) *Refer to 'Realdata mapping'.

Acknowledgement [g] [ ] [Set ID][ ] [OKiNG] [Data] [x]

08.Brightness (Command: k h) To adjust screen brightness.

You can also adjust brightness in the PICTURE menu.

Transmission[k] [h][] [Set ID] [] [Data] [Cr]

Data Min: 00 _ Max: 64 (*transmit by Hexadecimal code) _Refer to 'Real data mapping'.

Acknowledgemen_ [h][ ][Set ID][ ] [OKiNG] [Data] [x]

				-O
				-O
09.	Color (Command:		k i)	m
				Z
	To adjust screen	color.		X
	You can also adjust color in the PICTURE menu.
	Transmission[k]	[i][]	[Set ID][]	[Data] [Cr]
	Data Min: 00 _ Max: 64 (*transmit by Hexadecimal code)
	_Refer to 'Realdata mapping'.
	Acknowledgement[i]		[] [Set ID] []	[OK/NG] [Data] [x]

10.Tint (Command: k j) To adjust screen tint.

You can also adjust tint in the PICTURE menu. Transmission [k] [j] [ ] [Set lD] [ ] [Data] [Cr]

Data Red: 00 _ Green: 64 (*transmit by Hexadecimal code) *Refer to 'Realdata mapping'.

ACknowledgemen_[j ][] [Set ID] [ ] [OK/NG] [Data] [x]

125