LG Electronics 40LF6300 Connections Notifications, Connecting to an Antenna or Cable, Digital

ENGLISH

CAUTION

yyDisconnect the power before moving or installing the TV. Otherwise electric shock may occur.

yyRemove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

yyIf you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. When using a third-party wall mount, it is not covered by the warranty.

yyDo not over tighten the screws as this may cause damage to the TV and void your warranty.

yyUse the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

yyUse the screws that are listed on the VESA standard screw specifications.

yyThe wall mount kit includes an installation manual and necessary parts.

yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.

yyThe length of screws may differ depending upon the wall mount. Make sure to use the proper length.

yyFor more information, refer to the manual supplied with the wall mount.

yyWhen using the wall mounting bracket, apply the adhesive protective label to cover the unused stand opening(s). This will prevent the accumulation of dust and dirt. (Use only when provided with your particular model.)

Provided Item

Adhesive Protective Label

yyWhen attaching a wall mounting bracket to the TV, insert the wall mount inner spacers into the TV wall mount holes to adjust the vertical angle of the TV. (Use only when provided with your particular model.)

Provided Item

Wall Mount Spacer

10

Connections (Notifications)

You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.

NOTE

yyIf you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device. yyThe external device connections may differ from

the model.

yyConnect external devices to the TV regardless of the order of the TV port.

yyIf you connect a gaming device to the TV, use the cable supplied with the gaming device.

yyRefer to the external equipment’s manual for operating instructions.

yyIn PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

yyDepending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch TV. The RF cable may not be supplied, depending upon the model.

CAUTION

yyMake sure not to bend the copper wire of the RF cable.

Copper wire

yyComplete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

NOTE

yyUse a signal splitter to use 2 TVs or more. yyDTV Audio Supported Codec: MPEG, Dolby

Digital.