LG Electronics 40LF6300 Licenses, Troubleshooting, Registering Magic Remote, Precautions to Take

Registering Magic Remote

How to register the Magic Remote

	To use the Magic Remote, first pair it
	with your TV.
	1 Put batteries into the Magic Remote
	and turn the TV on.
	2 Point the Magic Remote at your TV
	and press the	Wheel (OK) on the
(Wheel)	remote control.
	* If the TV fails to register the Magic
	Remote, try again after turning the TV
	off and back on.

yyDo not drop the battery. Avoid extreme shocks to the battery.

yyInserting the battery in the wrong way may result in explosion.

Licenses

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

ENGLISH

How to deregister the Magic Remote

	Press the	(BACK) and	(Home)
(BACK)	at the same time, for five seconds, to
	unpair the Magic Remote with your TV.
	Pressing and holding the		button
(Home)	will let you cancel and re-register
	Magic Remote at once.

How to use Magic Remote

yyShake the Magic Remote slightly to

the right and left or press		(Home),
(INPUT),	buttons to make the

pointer appear on the screen. (In some TV models, the pointer will appear when you turn the Wheel button.)

yy If the pointer has not been used for a certain period of time or Magic Remote is placed on a flat surface, then the pointer will disappear.

yyIf the pointer does not move as you wish, shake Magic Remote to the left and right. The pointer will move to the center of the screen.

yy The Magic Remote depletes batteries faster than a normal remote due to the additional features.

Precautions to Take

yyUse the remote control within the specified range (within 10 m, 32.8 ft.) You may experience communication failures when using the device outside the coverage area or if there are obstacles within the coverage area.

yyYou may experience communication failures depending on the accessories. Devices such as a microwave oven and wireless LAN operate in the same frequency band (2.4 GHz) as the Magic Remote. This may cause communication failures.

yyThe Magic Remote may not work properly if a wireless router (AP) is within 1 meter (3.28 ft) of the TV. Your wireless router should be more than 1 m (3.28 ft.) away from the TV.

yyDo not disassemble or heat the battery.

Open Source Software Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for three

(3)years from the date on which you purchased the product.

Troubleshooting

yyCannot control the TV with the remote control.

-Check the remote control sensor on the product and try again.

-Check if there is any obstacle between the product and the remote control.

-Check if the batteries are still working and

properly installed ( to , to ) yyNo image display and no sound is produced.

-Check if the product is turned on.

-Check if the power cord is connected to a wall outlet.

-Check if there is a problem in the wall outlet by connecting other products.

12