LG Electronics 26LQ63OH, 42CQ61OH, 22LQ63OH, 32LQ63OH owner manual Appendixp Endix, Troubleshooting

APPENDIXP ENDIX

TROUBLESHOOTING

The operation does not work normally.

APPENDIX

The remote control

doesn’t work

Power is suddenly

turned off

The video does not work.

No picture &No sound

Picture appears slowly

after switching on

No or poor color

or poor picture

Horizontal/vertical bars

or picture shaking

Poor reception on

some channels

Lines or streaks

in pictures

No picture

when connecting HDMI

VCheck to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV.

VEnsure that the batteries are installed with correct polarity (+ to +, - to -). V Ensure that the correct remote operating mode is set: TV, VCR etc.

V Install new batteries. *This feature is not available for all models.

VIs the sleep timer set?

VCheck the power control settings. Power interrupted.

VCheck whether the product is turned on.

VTry another channel. The problem may be with the broadcast. V Is the power cord inserted into wall power outlet?

V Check your antenna direction and/or location.

VTest the wall power outlet, plug another product’s power cord into the outlet where the product’s power cord was plugged in.

VThis is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes.

VAdjust Color in menu option.

VKeep a sufficient distance between the product and the VCR. V Try another channel. The problem may be with the broadcast. V Are the video cables installed properly?

V Activate any function to restore the brightness of the picture.

VCheck for local interference such as an electrical appliance or power tool.

VStation or cable product experiencing problems, tune to another station. V Station signal is weak, reorient antenna to receive weaker station.

V Check for sources of possible interference.

VCheck antenna (Change the direction of the antenna).

VIf an HDMI cable doesn’t support High Speed HDMI, it can cause flickers or no screen display. In this case use the latest cables that support High Speed HDMI.

90