12ASSEMBLING AND PREPARING
Mounting on a table
1Lift and tilt the TV into its upright position on a table.
-Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation.
| 10 cm |
|
| (4 inch) |
|
10 cm | 10 | cm |
| ||
|
| |
| 10 cm | |
Securing the TV to a table
Fix the TV to a table to prevent from tilting forward, damage, and potential injury.
To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand.
warning
yyTo prevent TV from falling over, the TV
2 Connect the power cord to a wall outlet.should be securely attached to the floor/wall per installation instructions. Tipping, shaking,
or rocking the TV may cause injury.
ENGLISH
Caution
yyDo not place the TV near or on sources of heat, as this may result in fire or other damage.
Adjusting the angle of the TV to suit view
(Depending on model)
Swivel 90±4 degrees to the left or right and adjust the angle of the TV to suit your view.
90±4 | 90±4 |
CAUTION
yyWhen adjusting the angle of the TV, watch out for your fingers.
-Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury.
Caution
yyMake sure that children do not climb on or hang on the TV.
