10 206-4213

Pro:Centric Setup

Administration and management options for the Pro:Centric server are described in detail in the
Pro:Centric™ Server Admin Client User Guide. This document describes only those settings that must
be specied on the TVs.
On the TVs, the Data Channel must be set appropriately to enable Pro:Centric remote management/
administration facilities, while the Pro:Centric Application Mode must be set appropriately to enable the
Pro:Centric application.
• Remote management/administration (TV E-Z Installation): The Pro:Centric server Admin Client provides
remote management/administration facilities for downloading splash screens and software/firmware
updates as well as facilities for downloading the FTG Channel Map and FTG Installer Menu settings for
TVs that are in FTG Mode via CPU.
• Pro:Centric application: The application, which operates in conjunction with FTG and PPV Modes,
comprises the Pro:Centric interactive menus/features described on the previous page. Pro:Centric
application settings are managed via the Pro:Centric Admin Client.
The Data Channel and Pro:Centric Application Mode can be set using one of the following methods:
• When the TV is in a factory default state, the Automated Installation Routine Wizard provides Auto or
Manual options for conguring both the Data Channel and the Pro:Centric Application Mode.
The Automated Installation Routine Wizard also provides a USB Conguration option that enables you
to congure a TV for FTG Mode via CPU using an FTG Conguration (.tlx) le stored on a USB memory
device. The FTG Conguration le incorporates FTG Installer Menu settings, which includes Installer
Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL.
Refer to “Automated Installation Routine Wizard” on pages 11 to 13 for further information on the
Automated Installation Routine Wizard options.
• If the TV is in Pass-through Mode, set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL)
to the appropriate values. Refer to “Installer Menu” information on pages 18 to 26 for further information.
Also, as necessary, refer to “Custom Master TV Setup” information on pages 14 to 17 and/or cloning
information on pages 28 to 36.
• If the TV is in FTG Mode (via CPU or EBL), use the appropriate software to update Installer Menu items
098 PRO:CENTRIC and 119 DATA CHANNEL and then transfer the FTG Installer Menu settings to the
TV in accordance with the FTG Mode of conguration. Refer to FTG Mode information on pages 37 to
48 for further information.
Pro:Centric Operation (Cont.)