30 206-4213
USB Cloning Procedures (Cont.)
Teach Master TV Setup to Target TV
1. Turn ON the Target TV.
The next step depends on whether the Automated Installation Routine
Wizard appears on the screen when you turn ON the TV:
• If the wizard is displayed, the TV is already in the required factory
default state. Use the Up/Down arrow keys on the Installer Remote
to select Exit from the Welcome screen, and press OK to exit the
wizard. Then, go to step 3.
• Otherwise, ensure the Target TV is in Pass-through Mode. Then,
continue with step 2.
2. Use the Installer Remote to access the Target TV Installer Menu (see
“Accessing the Installer Menu” on page 18 for further information). Set
Installer Menu item 117 FACT DEFAULT to 001, and press OK. When
the value changes back to 0, press OK again to exit the Installer Menu.
Note: This step restores factory default settings on the TV, which will
in turn re-activate the Automated Installation Routine Wizard. Use the
Up/Down arrow keys on the Installer Remote to select Exit from the
Welcome screen. Then, press OK to exit the wizard.
3. Plug the USB memory device with the .tlx le into the Target TV USB IN
port.
4. Press MENU SETTINGS on the Installer Remote to display the TV
setup menus. Use the arrow navigation keys to select/highlight the
Option menu icon, and then press the number “7” key a total of seven
times to display the USB Download Menu.
5. Use the Up/Down arrow keys to select Teach To TV (TLX), and then
press OK.
6. Use the Up/Down arrow keys to select the Master TV Setup you want to
install, and then press OK. Note: Filenames identify the TV and the TLX
version (see example at right).
Teaching status will be shown on a progress bar in a new window.
When the Teaching process is complete, the TV will briey display a
“Teaching Completed” window and then exit the USB Download Menu.
7. Remove the USB memory device from the Target TV, and verify that
the Master TV Setup is now resident on the Target TV.
Note: After the Teaching process is complete, the TV tunes according to
the setting of Installer Menu item 004 STRT CHANNEL (Start Channel). If
a Start Channel is specied, the TV will tune to that channel; otherwise, the
TV will return to the last channel tuned.
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (TLX)
Previous OK
Teach To TV (TLX)
Previous OK
xxLT670H-UA00003.TLX
UPDATING...
Do not unplug!
50%
Teach To TV