Cloning Procedures (Cont.)
(Continued from previous page)
3.If the Master TV Setup contains a TV Zone # assignment, make sure to assign the same Zone designation in the Target TV at this time. See Reference section, “Using the TV Zoning Feature,” for further information.
Note: In order for the proper
4.Insert the USB memory device with the TLX file into the Target TV’s USB port.
5.Press MENU on the Installer Remote to display the TV setup menus. Use the arrow navigation keys to select/highlight the Option menu icon, and then press the number “7” key a total of seven times to display the TV Manager / USB Download Menu.
6.With the TV Manager / USB Download Menu on display, use the Up/ Down arrow keys to select Teach To TV (TLX), and then press OK.
7.In the Teach To TV (TLX) window, use the Up/Down arrow keys to select the Master TV Setup you want to install.
Note: Filenames for TLX files Learned from a TV are comprised of the TV model and a
8.Press OK when you are ready to initiate the Teaching process.
Teaching status will be shown on a progress bar in a new window. Do NOT remove the USB device until Teaching is complete. When the Teaching process is complete, the TV will briefly display a “Teaching Completed” window and then exit the TV Manager / USB Download Menu.
9.Remove the USB memory device, and verify that the Master TV Setup is now resident on the Target TV.
After the Teaching process is complete, the TV tunes according to the setting of Installer Menu item 004 STRT CHANNEL (Start Channel). If a Start Channel is specified, the TV will tune to that channel; otherwise, the TV will return to the last channel tuned.
TV Manager
USB | Ez Download |
| Logo Image Download |
| Upgrade TV Software |
| Upgrade PTC Software |
| Teach To TV (TLX) |
| Teach To TV (TLL) |
|
|
CC | Previous | OK | |
Teach to TV (TLX) |
| ||
No Channel Map | |||
in TLX file!! | |||
|
| ||
CC | Previous | OK |
Updating TLX File... 50 %
Do not remove the USB from the port! Do not unplug!
43 |